ELECTRONIC SPACE PRODUCTS INTERNATIONAL
1050 Benson Way, Ashland, OR 97520
Toll Free (800) 638-2581 * Fax (541) 488-8313
E-Mail: sales@espimetals.com
GRAPHITE - AEROMET GRADE
Typical Properties:
Average Apparent Density(gms/cm3): 1.80
Strength (RT):
Compressive (psi): 22,500
Flexural (psi): 13,300
Tensile (psi): 10,000
Hardness (Shore Scleroscope C-2): 75
Average Pore Size (microns): 0.8
Electrical Resistivity (70 oF):
µ Ohm Inches: 580
µ Ohm cm: 1350
Thermal Conductivity (70 oF):
(btu-ft./hr.-ft. 2- oF): 70
(Cal-cm/sec-cm. 2- oC): 0.29
Coefficient of Thermal Expansion (RT to 1000 oC):
inch/inch/ oF x 10-6: 4.7
inch/inch/ oC x 10-6: 8.4
Oxidation Threshold (oC): 460
Average Purity ppm-total Ash: 700
Anisotropy (unitless) Variation in Property Values with Direction of Measurement: All grades are isotopic. Variations in property values with direction of measurement are negligible.
Uniformity (unitless): All grades are homogeneous. Structure and properties are consistent within each piece, from piece to piece, from lot to lot.
Total Ash Range: 100 - 300 ppm
Typical Analysis in PPM:
Fe 50 - 200 Ti 1 - 5
Si 25 - 200 B Trace
Al 10 - 50 Li Trace
Mg Trace Ca Trace
V 50 - 100 K Trace
Ni Trace Na Trace